Dakota Digital lat-nr112 Manuel D’Utilisation

 

 

LED Tail Lights for 1966 GTO

MAN#650245 

 

   

1.  Remove the original bulb connectors from the bottom side of the housing. 
2.  Remove the plastic housing from the vehicle. 
3.  Remove the tail light lens by gently prying the housing away from the lens tabs. 

  

4.  Now is a good time to clean the lens and housing. If lenses are in bad shape a new set is 

recommended. 

5.  Remove the round mounting plate from the bottom of the LED assembly.  It is attached with 

two lock nuts.  Make sure the wire harness is through the center large hole. 

 

 

 

MAN#650245