Pelco DX7016-240 Manuel D’Utilisation
Pelco Manual C682M-E (11/01)
9
PROGRAMMING
Turn the system power ON; the Main Screen (DISPLAY mode) appears.
Figure 5. Display Mode
DISPLAY MODE
1
Date and Time Indicator –
Displays current date and time.
2
SEARCH Button –
Plays back and search recordings by date and time.
3
SETUP Button –
Programs camera settings, customize a recording schedule, set
up multiple password levels, and establish pan and tilt protocol.
4
PTZ Control Button –
Controls pan, tilt, and zoom functions. Sets patterns, tours,
and presets.
5
Copy Button (Backup) –
Only appears if CD-RW software and CD-RW drive are
installed.
6
Exit –
Closes DX7000 program.
7
HDD Storage Indicator –
Displays percentage of used hard disk storage space.
8
Activate Relay –
Turns connected relay ON/OFF.
9
Alarm Status Display –
Turns button color yellow when an alarm has been activated.
10
Motion Detection Status –
Turns button color blue, indicating motion is detected.
11
Screen Division
Single camera display
Displays cameras 1-9
Quad display, cameras 1-4
Displays cameras 10-16
Quad display, cameras 5-8
Displays all 16 cameras
Quad display, cameras 9-12
Sequencing mode – Sequence us-
ing single, four, or nine camera dis-
plays.
ing single, four, or nine camera dis-
plays.
Quad display, cameras 13-16
Full-screen display – Removes
menu bars from display. Click the
right mouse button to return to
previous screen display.
menu bars from display. Click the
right mouse button to return to
previous screen display.
00582