Logitech 900 Manuel D’Utilisation

Page

Replace the three screws that firmly attach the 
back cover to the logic board. Then, you are ready 
to reinstall the ‘rubberized’ back piece. This piece 
just snaps back in. Align the piece with the back of 
the remote and press firmly at the top. Move to the 
middle and press again. You should feel and hear 
very definite engagement. Press firmly along the 
sides and length of the piece to ensure that all tabs 
have been engaged. Then, inspect the edges. If it 
appears that a side tab did not fully engage, simply 
press the spot sideways and it should click right in. 
There should not be any spaces between this piece 
and the body of the remote. 

 
 
 
 
 
 
 

Install the remaining four screws back in the bat-
tery compartment and, if desired, re-apply the 
serial number sticker. If it came off cleanly there is 
generally enough glue to stick it back on. 

.

8.

Do a final test to make sure everything works as expected. Feel free to contact me if you have any questions. I’m 
always happy to help.