DKS Enterprises 6100 Manuel D’Utilisation

6050-065-L-11-08

UL325 Class of Operation 

Model 6050 Class I Only ; Model 6100 Class I, II, III, IV 

Type of Gate 

Vehicular Swing Gates Only 

Horsepower 1/2 

HP 

Voltage / Phase 

115 VAC Single-Phase 

Current 

Model 6050 1/2 HP –  4.3 Amps @ 120V ; Model 6100 1/2 HP –  5.4 Amps @ 120V 

Max Gate Weight 

Model 6050 - 400 Lbs. ;  Model 6100 - 500 Lbs. 

Max Gate Length 

Model 6050 - 10 Ft. ; Model 6100 - 14 Ft. 

Cycles Per Hour 

Model 6050 - 10 Per Hour ; Model 6100 - 60 Per Hour 

Speed 

90° in approximately 12 seconds 

Entrapment Protection 

Primary - Inherent adjustable clutch (Type C) 

   

Secondary - Inherent entrapment sensing system (Type A) and provision  

 

   

 

for connection of a non-contact sensor (Type B1)

6050 / 6100 SPECIFICATIONS

Use this manual with the following models only:
6050-080, 6050-081, 6100-080, 6100-081, 6100-082*, 6100-083*.

*Optional Convenience Open System

DoorKing, Inc. reserves the right to make changes in the products described in this manual without notice and without obligation of DoorKing, Inc. to notify any 
persons of any such revisions or changes. Additionally, DoorKing, Inc. makes no representations or warranties with respect to this manual. This manual is 
copyrighted, all rights reserved. No portion of this manual may be copied, reproduced, translated, or reduced to any electronic medium without prior written 
consent from DoorKing, Inc.

11”

27.75” with Convenience Open

23” Standard

Post Mount Kit

P/N 2600-674

Pad Mount Kit

P/N 2600-671

Dimensions are the same 
for the operator housings.

Arm Assembly

Arm Assembly

Distance can vary.
6” minimum.

10.5”

13.5”

6.75”

6.25”

7.25”

6.75”

2.25”

18”

6”

3”

3”

11”

Note: 6100’s with Convenience Open:
Output shaft is offset 1” from center.

9.5”