ONKYO TX-SR501E Manuel D’Utilisation

28

This chapter explains how you can play your AV components 
through the TX-SR501/TX-SR501E.

See pages 10–19 for information on connecting your AV 
components to the TX-SR501/TX-SR501E. 

The digital input assigned to the input source (see page 24) 
has priority over that input source’s analog input. To use the 
analog input, set the input source’s format to Analog (see the 
following section).

The format of the digital input signal appears on the display, 
as shown: DOLBY DIGITAL, DTS, DTS-ES, or PCM (ste-
reo).

Other Functions:
See page 32 for functions that you can use while listening to 
your AV components.

Listening Modes:
See page 34 for information on the listening modes that you 
can use while listening to your AV components.

Remote Controller:
See pages 40, 41 for information on using the TX-SR501/
TX-SR501E’s remote controller to control your other AV 
components.

With this function you can choose which signal format (ana-
log or digital) you want to use for AV components that are 
connected to a digital input and analog input. When an input 
source is assigned to an OPTICAL or COAXIAL digital 
input (page 24), the digital input has priority over the corre-
sponding analog input. However, with this function you can 
override that and force the TX-SR501/TX-SR501E to use the 
analog input. In addition, you can set the DVD input source 
to use the multi-channel inputs.

The name of the selected source appears 
on the display, as shown.

If you’re using a MiniDisc recorder, you 
can set the display to show “MD” instead 
of “TAPE.” See page 25.

Press the remote controller’s [RCVR/
TAPE] button to select RCVR mode 
before using the remote controller.

The A and B speaker indicators show 
whether each speaker set is on or off.

CH +

The volume can typically be set to MIN, 1 
though 79, or MAX.

The name of the selected source appears 
on the display.

The current format appears on the display 
for about three seconds.