GoVideo dv2150 Manuel D’Utilisation
29
Audio Settings
Digital Out
Sets the format of the digital audio signal
from the rear panel Coaxial jack.
from the rear panel Coaxial jack.
1
In DVD Stop mode, press SETUP.
2
Select Audio > Digital Out.
3
Choose from the following:
Bitstream - Select if the DVD+VCR is
connected to a 5.1 channel amplifi er/
receiver with a Dolby Digital or DTS
decoder.
LPCM – Select if the DVD+VCR is con-
nected to a 2-channel (stereo) digital
amplifi er.
Bitstream - Select if the DVD+VCR is
connected to a 5.1 channel amplifi er/
receiver with a Dolby Digital or DTS
decoder.
LPCM – Select if the DVD+VCR is con-
nected to a 2-channel (stereo) digital
amplifi er.
Dynamic Range
Compresses the dynamic range of the
audio output (the difference between the
loudest and quietest passages) during
DVD playback.
audio output (the difference between the
loudest and quietest passages) during
DVD playback.
1
In DVD Stop mode, press SETUP.
2
Select Audio > Dynamic Range.
3
Use the buttons to move the
Dynamic Range slider from OFF (no
compression) to FULL (maximum
compression).
Dynamic Range slider from OFF (no
compression) to FULL (maximum
compression).