CAT articulated truck 725 Manuel D’Utilisation
12
725 Articulated Truck specifications
Sound Levels
Interior Cab
76 dB(A)
• The operator sound exposure Leq (equivalent sound pressure
level) measured according to the work cycle procedures
specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the
cab offered by Caterpillar, when properly installed and
maintained and tested with the doors and windows closed.
specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the
cab offered by Caterpillar, when properly installed and
maintained and tested with the doors and windows closed.
• Hearing protection may be needed when operating with an
open operator station and cab (when not properly maintained
or doors/windows open) for extended periods or in noisy
environments.
or doors/windows open) for extended periods or in noisy
environments.
Operating Weights
Front Axle – Empty
13 020 kg
28,704 lb
Center Axle – Empty
4830 kg
10,648 lb
Rear Axle – Empty
4410 kg
9,722 lb
Total – Empty
22 260 kg
49,075 lb
Front Axle – Rated Load
2010 kg
4,431 lb
Center Axle – Rated Load
10 790 kg
23,788 lb
Rear Axle – Rated Load
10 790 kg
23,788 lb
Total – Rated Load
23 590 kg
52,007 lb
Front Axle – Loaded
15 030 kg
33,135 lb
Center Axle – Loaded
15 620 kg
34,336 lb
Rear Axle – Loaded
15 200 kg
33,510 lb
Total – Loaded
45 850 kg
101,082 lb
Body Plate Thickness
Front
8 mm
0.31 in
Scow
14 mm
0.55 in
Side
12 mm
0.47 in
Base
14 mm
0.55 in
Service Refill Capacities
Fuel Tank
360 L
95 gal
Cooling System
86 L
22.7 gal
Hydraulic System
100 L
26.4 gal
Engine Crankcase
37 L
9.8 gal
Transmission
36 L
9.5 gal
Final Drives/Differential
132 L
34.9 gal
Output Transfer Gear Box
18 L
4.8 gal
Engine
Engine Model
Cat
®
C11 ACERT™
Gross Power – SAE J1995
230 kW
309 hp
Net Power – SAE J1349
225 kW
301 hp
Net Power – ISO 9249
227 kW
304 hp
Net Power – EEC 80/1269
227 kW
304 hp
Bore
130 mm
5.1 in
Stroke
140 mm
5.5 in
Displacement
11.15 L
680 in
3
• The power ratings apply at rated speed of 1,800 rpm when
tested under the conditions for the specified standard.
• The net power advertised is the power available at the
flywheel when the engine is equipped with alternator, air
cleaner, muffler and fan at minimum speed.
cleaner, muffler and fan at minimum speed.
• Net power when the fan is at maximum speed is 210 kW
(282 hp) per the SAE reference conditions.
• The 725 meets EPA Tier 3/EU Stage 3a emission
specifications for the U.S. and Europe through 2010.
• No engine derating required below 3048 m (10,000 ft).
Weights
Rated Payload
23.6 tonnes
26 tons
Body Capacities
Heaped SAE 2:1
14.3 m
3
18.8 yd
3
Struck
11.1 m
3
14.5 yd
3
Heaped SAE 1:1
17.5 m
3
22.9 yd
3
Transmission
Forward 1
7.85 km/h
4.88 mph
Forward 2
14.82 km/h
9.21 mph
Forward 3
22.53 km/h
14 mph
Forward 4
34.55 km/h
21.47 mph
Forward 5
48.08 km/h
29.88 mph
Forward 6
56.78 km/h
35.29 mph
Reverse 1
8.7 km/h
5.41 mph