Hitachi CP-X1230 Manuel D’Utilisation

26

With the INPUT menu, the items shown in the table below can be
performed. Perform each operation in accordance with the
instructions in the table below.

: SELECT

MENU

MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION

COLOR SPACE
COMPONENT
VIDEO
3D-YCS
VIDEO NR
P. INP.  INPUT
P. INP.  POSIT.
POWERUP  INPUT

AUTO
COMPONENT
AUTO
TURN OFF
LOW
VIDEO

 RGB

Select a color space mode using the 

/ 

buttons. :

AUTO 

 RGB  SMPTE240  REC709  REC601

Selecting the AUTO automatically selects the optimum mode.

This item can be selected only at a RGB signal or a component video

signal other than a COMPONENT port input of 525i(480i)/625i(576i)/SCART
RGB.

The AUTO operation may not work well at some signals. In such a case,

select a suitable mode except the AUTO.

Select a function of COMPONENT port using the 

/ 

buttons. : 

COMPONENT 

 SCART RGB

When the SCART RGB is selected, the COMPONENT port function as a port for
a SCART RGB signal input. Please refer to the section “Connecting Your
Devices”.

Select a signal type mode using the 

/ 

buttons. :

AUTO 

 NTSC  PAL  SECAM  NTSC4.43  M-PAL  N-PAL

Selecting the AUTO automatically selects the optimum mode.

This item is performs only at a video signal from the VIDEO port or the S-

VIDEO port. For a component video signal, the signal type is identified
automatically independently of this function.

The AUTO operation may not work well at some signals. If the picture

becomes unstable (ex. a irregular picture, a color lack), please select the mode
depending on the input signal.

Select the TURN ON or the TURN OFF using the 

/ 

buttons. :

TURN ON 

 TURN OFF

When the TURN ON is selected, the 3D-YCS mode works for a completely still
image, or images with few motions.

This item performs only at a video signal of NTSC3.58.

When this function performs, the setting of the item “VIDEO NR” of this

INPUT menu is not effective.

Select a noise reduction level using the 

/ 

buttons. : 

HIGH 

 MIDDLE  LOW

The noise on screen is reduced according to the selected level.

This item performs only at a video signal from the VIDEO port or the S-

VIDEO port. At a video signal of NTSC3.58, this function performs only when
the TURN OFF is selected to the item “3D-YSC” of this INPUT menu.

When this adjustment is excessive, certain degradation may appear on

the picture.

(This table is continued to the following page.)