ICOM ds-100-02 Manuel D’Utilisation
i
FOREWORD
Thank you for purchasing this Icom product. The DS-100 (#02)
DSC CONTROLLER
is designed and built with Icom’s superior
technology and craftsmanship. With proper care this product
should provide you with years of trouble-free operation.
should provide you with years of trouble-free operation.
IMPORTANT
READ ALL INSTRUCTIONS
carefully and com-
pletely before using the controller.
SAVE THIS INSTRUCTION MANUAL—
This in-
struction manual contains important operating instructions for
the DS-100.
the DS-100.
EXPLICIT DEFINITIONS
FEATURES
☞
Class D DSC terminal
The DS-100 (#02)
VHF DSC CONTROLLER
is designed as
a ‘Class D DSC terminal unit’ for the IC-M401EURO
or
IC-M503
VHF MARINE TRANSCEIVERS
.
DS-100 (#02) is not compatible with DS-100 (#01). The
plug of the control cable is a different type.
plug of the control cable is a different type.
☞
Self ID indication
THE MMSI NUMBER SHOULD BE PROGRAMMED BY
A DEALER PRIOR TO INSTALLATION.
The DS-100 (#02) does not function when there is no ID
programmed. Therefore, the ID code should be checked
in the Set-up menu.
A DEALER PRIOR TO INSTALLATION.
The DS-100 (#02) does not function when there is no ID
programmed. Therefore, the ID code should be checked
in the Set-up menu.
WORD
DEFINITION
RWARNING
Personal injury, fire hazard or electric
shock may occur.
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
of personal injury, fire or electric shock.
Icom, Icom Inc. and the
logo are registered trademarks of
Icom Incorporated (Japan) in the United states, the United King-
dom, Germany, France, Spain, Russia and/or other countries.
dom, Germany, France, Spain, Russia and/or other countries.
DS-100#02-(2) 01.12.13 10:53 AM Page ii (1,1)