GE 21115 Manuel D’Utilisation

6.  After the handset is properly charged, connect the telephone line cord by 

plugging one end of the line into the jack on the back of the base marked TEL 

LINE and the other end into a telephone wall jack.

7.  Attach the belt clip. Align the tabs on the inside edges of the belt clip with the 

slots on each side of the handset and snap the belt clip into place.
NOTE: Only the base needs a phone line connection. Extra cordless 

handsets with charge cradles can be installed anywhere electrical power 

is available.

This phone is equipped with a data port jack labeled DATA on the back of the 

base unit for you to connect an auxiliary phone device, such as a fax machine, 

computer modem, or answering system.

There are several different menus available on the handset and base, which are 

programmable through the display box: LANGUAGE, INTERCOM RING, LINE 

HOLD REMINDER, RESET, DE-REGISTER, and REGISTRATION.
The table below shows the programmable items. 
Programmable Items  Choices (factory default settings marked with *)
LANGUAGE 

ENGLISH*/FRENCH/SPANISH

INTERCOM RING 

ON*/OFF

LINE RING 

ON*/OFF

RINGER VOLUME 

HIGH/MIDDLE*/LOW

RINGER TYPE 

1*/2/3/4

AREA CODE 

LOCAL CODE 

 

:EMPTY*  (3 Digits) 

 

REGIONAL CODES (1-6) 

:EMPTY*  (3 Digits each)

VOICE MAIL 

EMPTY* 

INFO SERVICE 

411*