Gemini MPX-3 Manuel D’Utilisation

VOLTAGE SELECTOR:  To set the proper voltage, adjust the VOLTAGE SELECTOR (1) switch to 115 or 230 volts.

POWER JACK (AC IN):  Connect the power plug into the POWER JACK (2) for power.

REMOTE CONTROL:  Use the included CABLE & REMOTE CONTROL (3) to connect the REMOTE CONTROL to the

MAIN UNIT.

LINE OUTPUT JACKS:  LINE OUTPUT JACKS (4) provide stereo sound via RCA cables to your MIXER or RECEIVER.

NOTE:  MAKE SURE CABLES ARE PLUGGED IN TIGHT FOR OPTIMAL SOUND.

DIGITAL OUTPUT (BNC):  Use the BNC (5) jack to connect to any type of device that accepts DIGITAL SIGNALS.

POWER:  Press the POWER (6) button to turn on the CD player.

NOTE:  MAKE SURE VOLTAGE SELECTOR SWITCH (1) IS SET BEFORE USE.

  Put a CD in the DISC TRAY (7) after pressing OPEN/CLOSE (8); trays hold both 12 cm and 8 cm CDs.

Tap OPEN/CLOSE (8) once to open the tray and again to close it.

DISPLAY:  The DISPLAY (9) shows the various functions for the CD Player.  See FUNCTION DESCRIPTIONS for details.

PLAYBACK DISPLAY BAR:  The PLAYBACK DISPLAY BAR (10) shows the TIME ELAPSED and TIME REMAINING.

PLAY/PAUSE:  Press PLAY/PAUSE (11) button to activate PLAY or PAUSE mode.  See CUE or ROBO START

INSTRUCTIONS for details.

CUE/PREVIEW:  Tap CUE/PREVIEW (12) to come back to a set CUE or press and hold to PREVIEW from a CUE,

refer to CUE INSTRUCTIONS.

SEARCH (FOLDER/FILE):  Use the SEARCH (13) buttons to scan forward and reverse directions on a TRACK. 

In MP3 mode use the FOLDER button to view which folder is being read and use the FILE button to view the file.

TRACK SEARCH:  Press the TRACK SEARCH (14) buttons to select which TRACK to play.

TIME:  Tap the TIME (15) button to switch the TIME preference in three modes:  ELAPSED, REMAIN, TOTAL REMAIN.

STOP:  Press STOP (16) once to stop the CD.

SINGLE:  Tap SINGLE (17) for: SINGLE AUTO CUE, CONTINUOUS, and NORMAL modes.

FLY CUE:  FLY CUE (18) sets a CUE POINT on the fly.

B/EXIT:  Press B/EXIT (19) in PLAY mode, after a CUE POINT is memorized to start a LOOP, press again to exit LOOP.

B-EDIT:  Press B-EDIT (20) and use the JOG WHEEL (22) to edit an existing LOOP, press again to exit EDIT mode.

RETURN:  To play from a saved CUE POINT or a LOOP, press RETURN (21) to play the LOOP or the CUE again.

JOG WHEEL:  The JOG WHEEL (22) has various functions:  PITCH BEND, CUEING, and TRACK SEARCHING.

JOG MODE:  Press to change the JOG MODE (23) of the JOG WHEEL (22) from MUSIC to TRACK mode.

JOG MODE LED:  The 

JOG MODE LED (24) displays which JOG MODE (23) is in use.

PITCH:  The PITCH (25) button activates the PITCH CONTROL SLIDE (27)

PITCH BEND:  Buttons for PITCH BEND (26), lower or raise the pitch percentage (- or +) 4% when pressed.

PITCH CONTROL SLIDE:  Moving the PITCH CONTROL SLIDE (27) up or down will lower or raise the pitch

percentage (- or +) 4%, 8%, & 16%.

VPS (VARIABLE PITCH SELECTOR) 4%, 8% & 16%:  Use the VPS (28) buttons use to change the PITCH settings

from 4%, 8%, & 16%.

ROBO START:  Using ROBO START (29) enables you to alternate play between two CDs using both sides.