Dakota Digital lat-nr161 Manuel D’Utilisation

LAT-NR161 

LED Tail Lights for ’60-‘65 Impala/Caprice, ’67 Impala,   

‘75-‘76 Caprice, and ’71-’73 Mustang 

 

MAN#650159b 

 

  

  

  

 

 

      

         

 

 

 

 

 

1.  Remove the original bulb connector from the back side of the housing.  
2.  Remove the light bulb. 
3.  Remove the tail light lens.  

• On 

the 

60-65 Impala, the screws are directly in the lens.  

• On 

the 

67 Impala, the nuts securing the tail light assembly must be removed first from 

inside the trunk.  Once the assembly is removed, the screws on the back of the housing 
can be taken out. 

• On 

the 

75-76 Caprice, the nuts securing the tail light assembly must be removed first from 

inside the trunk.  Once the assembly is removed, the screws on the top and bottom sides of 
the housing are removed and the metal trim taken off.  Last the screws holding the lens are 
removed so the lens can come off. 

• On 

the 

71-73 Mustang, the lens is snapped into place with tabs around the outside edge.  

Carefully pry the lens off using a flat blade screwdriver. 

MAN#650159b