OKI 8300e c6000n Manuel D’Utilisation

OkiLAN 8300e Network User’s Guide, C6000n and C6100 Series

UNIX - 109

d. Start the print scheduler.

e. Activate the print queue.

f.

Enable the print queue

To customize output, for example to add additional commands at 

the start of each print job, you can edit a copy of the netstandard 

model file then add it using the lpadmin command

If an incorrect IP Address, Subnet Mask or Gateway is entered, the 

network may go down or other damage may occur.  Check the 

address with the network manager.

The following example uses HP-UX10.20 and an OKI printer as 

examples. The absolute path and method of configuring commands 

may differ in other versions of the OS.  Refer to the workstation 

manual for more details.

1. Confirm that the IP address of the printer has been set.  See 

network interface card IP address configuration for more 

information.