ZyXEL Communications NWD-370N Manuel D’Utilisation

ZyXEL NWD-370N User’s Guide

Chapter 4 Wireless Configuration

47

2 If you select the Infrastructure network type in the previous screen, skip to step

 3

. If you 

select the Ad-Hoc network type in the previous screen, a screen displays as follows. 
Select a channel number and click Next to continue.

Note: To associate to an ad-hoc network, you must use the same channel as the peer 

computer.

Figure 29   Profile: Wireless Settings 

Network Type

Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer 

computer.

Next

Click Next to go to the next screen.

Exit

Click Exit to go back to the previous screen without saving.

Scan Info

This table displays the information of the available wireless networks within the 

transmission range.

,

,

 or

denotes that the wireless device is in infrastructure mode and the wireless 

security is activated.
denotes that the wireless device is in infrastructure mode but the wireless 

security is deactivated.

denotes that the wireless device is in Ad-Hoc mode and the wireless 

security is activated.

denotes that the wireless device is in Ad-Hoc mode but the wireless security 

is deactivated.

SSID

This field displays the SSID (Service Set IDentifier) of each AP or peer device.

Scan

Click Scan to search for available wireless devices within transmission range.

Select

Select an available wireless device in the table and click Select to add it to this 

profile.
Whenever you activate this profile, the NWD-370N associates to the selected 

wireless network only.

Table 14   Profile: Add a New Profile  (continued)