Garmin g1000 beechcraftbaron58 g58 pilots guide Manuel D’Utilisation
Garmin G1000 MFD Pilot’s Guide for the Beechcraft 58/G58
190-00629-00 Rev. B
7-3
MULTI FUNCTION DISPLAY
ELECTRONIC CHECKLISTS (OPTIONAL)
The G1000 Multi Function Display provides optional
checklists which allow a pilot to quickly find the proper
procedure on the ground and during each phase of flight.
procedure on the ground and during each phase of flight.
NOTE: The checklist information described in this
section is not intended to replace the checklist
information described in the Beechcraft 58/G58
Pilot’s Operating Handbook (POH) and the Pilot
Safety and Warning Supplements document.
section is not intended to replace the checklist
information described in the Beechcraft 58/G58
Pilot’s Operating Handbook (POH) and the Pilot
Safety and Warning Supplements document.
NOTE: Garmin is not responsible for the content
of the checklists. User-defined checklists are
created by the aircraft manufacturer. Additionally,
modifications or updates to the checklists are
coordinated through the aircraft manufacturer.
The user cannot edit the checklists.
of the checklists. User-defined checklists are
created by the aircraft manufacturer. Additionally,
modifications or updates to the checklists are
coordinated through the aircraft manufacturer.
The user cannot edit the checklists.
Displaying the Checklist Page
The Splash Screen displays the current checklist file
that is installed for the Beechcraft 58/G58 aircraft. If no
checklist is present, then the Spalsh Sceen displays the text
“CHECKLIST FILE NOT PRESENT” and the CHKLIST
softkey is greyed out.
checklist is present, then the Spalsh Sceen displays the text
“CHECKLIST FILE NOT PRESENT” and the CHKLIST
softkey is greyed out.
To select the Checklist Page:
1. From any page, press the CHKLIST softkey.
Selecting a Procedure Group
Depending on the specific airframe, there are a certain
number of groups of procedures with their respective
checklists available to the pilot.
checklists available to the pilot.
To select a procedure group:
1. Press the
CHKLIST
softkey.
2. Turn the large FMS knob to select the ‘GROUP’
field.
3. Turn the small FMS knob to select the desired
procedure and press the ENT key.
Selecting a Checklist within the Procedure
Group
Group
1. Turn the large FMS knob to select the ‘Checklist’
field.
2. Turn the FMS knob to select the desired checklist
and press the ENT key.
Selecting a Checklist Item
Two methods are available to select a checklist item: (1)
pressing the ENT key; or (2) pressing the DONE softkey.
(1) Pressing the ENT key:
(1) Pressing the ENT key:
With the desired checklist displayed, turn the FMS
knob to move up and down the checklist and highlight
an item with a hollow white rectangle. The default color
for non-selected checklist items is blue and once the item
is highlighted, the color turns white. To select a checklist
item that is highlighted, press the ENT key. The selected
item turns green in color again for ease of identification,
and then a check mark is placed in the box next to the
item. As an item is selected, the next item is automatically
highlighted for selection.
an item with a hollow white rectangle. The default color
for non-selected checklist items is blue and once the item
is highlighted, the color turns white. To select a checklist
item that is highlighted, press the ENT key. The selected
item turns green in color again for ease of identification,
and then a check mark is placed in the box next to the
item. As an item is selected, the next item is automatically
highlighted for selection.