Baby Jogger city select second seat kit Manuel D’Utilisation

City Select Second Seat Kit

Instructions

1  From the front of, and facing the stroller, remove right front mounting bracket plug by
  firmly pressing the black button located above the front wheel and pulling up on the plug.
  Repeat on left side.
2  Insert right Adaptor Bracket into the right mounting bracket until it clicks into place.
  Repeat on left side.
  NOTE: The Adaptor Brackets are labeled with an L or R for your convenience.

8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227

T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com

The sample product shown on this manual

may differ slightly from your production

quality City Select Second Seat Kit. However,

this will not affect the assembly or

functionality of your Baby Jogger product.

NOTE: Your City Select Second Seat Kit can

also be used facing the rear of the stroller.

WARNING: Always

remove child from

seat before removing

seat from frame.

1 Remove child from seat. Press grey buttons on seat
mounting brackets and pull up until the seat detaches.

2 Press silver button on right Adaptor Bracket and pull
upwards. Repeat on left side.

NOTE: Replace mounting bracket plugs when
second seat is not in use.

To make room for the
seat’s footwell: Unzip the
right front and left front
portions of the basket.

To adjust the footwell:
Press both buttons on the
side of the footwell and
pull footwell upwards.

To Remove the City Select Second Seat:

When Rear Facing:

This Kit Includes:

1 City Select Seat
2 Adaptor Brackets

3  Align mounting brackets
  on the second seat with
  the top of the Adaptor
  Brackets.
4  Insert seat onto Adaptor
  Brackets until it clicks
  into place.

Adaptor Brackets