Hitachi 13VR10B Manuel D’Utilisation

NORMAL PLAYBACK 

 

33

Make sure... 
• Power must be turned on. 

1 Insert a prerecorded tape 
If the erase-protection tab has been removed, the TV/VCR will start playback 
automatically 

2 To begin playback 

 

Press PLAY button. 

3 To stop playback 

 

Press STOP button when playback is completed. 

• Tracking adjustment will be set automatically (Digital Tracking function-DTR) 
when you start playback. 

NOTE: The following function is controlled only by the buttons on the VCR. 

• When playing pre-recorded tapes or tapes recorded on units other than your 
own, noise lines (black and white streaks) may appear on the playback 
picture. If this occurs, you can adjust the tracking control manually by 
pressing CH 

 or 

button until the streaks disappear. To return to the DTR 

function, stop the tape once and start playback again. 
• You can reduce the noise lines by pressing CH 

 or 

button in slow 

mode, too. Slow tracking adjustment will not be set automatically. 

Note: In Still mode, press SLOW button and press CH 

 or 

button until the 

streaks disappear. To return to Still mode, press PAUSE/STILL button again.