Human Touch ht-2620-ijoy-300 Manuel D’Utilisation
Please send any questions or comments regarding these instructions to:
documentation@humantouch.com
© 2011 Human Touch
®
, LLC.
2
INSTALLING THE NEW POWER PANEL
1. Holding the new power panel next to the chair base, connect the two sets of power panel connectors to the corresponding connectors on the chair base.
2. Using a flat-head screwdriver and screw, attach the green grounding wire to the chair using the threaded screw hole as shown.
3. Position the power panel firmly into place, then secure it using the four screws.
4. Tip the chair gently back to an upright position.
5. Plug in the chair and power it on.
6. Verify that the chair is now receiving power and that the remote control is working properly.
2. Using a flat-head screwdriver and screw, attach the green grounding wire to the chair using the threaded screw hole as shown.
3. Position the power panel firmly into place, then secure it using the four screws.
4. Tip the chair gently back to an upright position.
5. Plug in the chair and power it on.
6. Verify that the chair is now receiving power and that the remote control is working properly.