ONKYO dv-cp704s Manuel D’Utilisation

18

Connecting the DV-CP704—Continued

This section explains how to connect the DV-CP704 to 
your TV or projector. 
In this hookup example, the TV handles the audio and video. 
To enjoy Dolby Digital or DTS (5.1-channel surround), 
you’ll need a compatible decoder (see page 19).
The DV-CP704 has three types of video output: compo-
nent video, S-Video, and composite video. Component 
video offers the best picture quality, so if your TV supports 
it, use a commercially available component video cable to 
connect the DV-CP704’s COMPONENT VIDEO OUT-
PUT to the component video inputs on your TV. If your 
TV supports progressive scanning, you must use compo-
nent video in order to take advantage of that feature.
S-Video offers better picture quality than composite 
video, so if your TV supports it, use the S-Video cable to 
connect the DV-CP704’s S VIDEO OUTPUT to an 
S-Video input on your TV. Failing that, use the supplied 

composite video cable to connect the DV-CP704’s 
VIDEO OUTPUT to a composite video input on your TV.

Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro 
Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL 
HIGH DEFINITION TELEVISION SETS ARE FULLY 
COMPATIBLE WITH THIS PRODUCT AND MAY 
CAUSE ARTIFACTS TO BE DISPLAYED IN THE 
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE 
SCAN PICTURE PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION” 
OUTPUT. IF THERE ARE QUESTIONS REGARD-
ING OUR TV SET COMPATIBILITY WITH THIS 
MODEL 525p AND 625p DVD PLAYER, PLEASE 
CONTACT OUR CUSTOMER SERVICE CENTER.

Notes:
• Before making any connections, turn off the 

DV-CP704 and your TV and disconnect their power 
cords from the wall outlets.

• Also refer to the connection information supplied with 

your TV.

• If you connect a TV that does not support progressive 

scanning to the component video output, change the 
HDMI Output Setting to Off (see page 44).

• Connect the DV-CP704’s video outputs directly to 

your TV. Don’t connect a VCR or other video equip-
ment in between your DV-CP704 and TV. Doing so 
may result in picture distortion, because of the copy 
protection system used on DVD-Video discs.

• When you use the analog audio outputs, don’t play 

DTS CDs or don’t select DTS soundtracks on 
DVD-Video discs. Doing so will produce unpleasant 
digital noise, which may damage your equipment.

(yellow)

(yellow)

(white)

(white)

(red)

(red)