ICOM ic-f70 Manuel D’Utilisation

1

1

■ Programmable function keys

The following functions for MDC 1200 system operation can
be assigned to the programmable function keys;
IC-F70 series

: [EMERGENCY], 

[UP], 

[DOWN], 

[MONITOR], [P0], [P1], [P2] and [P3]

IC-F1700 series : [UP]*, [DOWN]*, [P0], [P1], [P2], [P3] and

*IC-F1810, IC-F1821/D, IC-F2810 and IC-F2821/D only

Consult your Icom dealer or system operator for details con-
cerning your transceivers programming.
If the programmable function names are bracketed in the fol-
lowing explanations, the specific key is used to activate the
function depends on the programming.

“MDC” is displayed on the key indicator. (IC-F70 series only)

➥Push to enter the MDC menu selection mode. Then select

the desired MDC menu from “SELCALL,” “CALALERT,”
“STUN,” “REVIVE,” “RADIOCHK,” “STATUS” and “MSG”
using [CH Up], [CH Down], [MDC Up] or [MDC Down].
After selection, push this key again to enter the transceiver
alias or message channel selection mode.

➥While in the transceiver alias or message channel selec-

tion mode, push to return to the MDC menu selection
mode.

“

” or “

” is displayed on the key indicator. (IC-F70 series

only)

➥Push to select the MDC menu after entering the MD menu

selection mode.

➥Push to select the desired transceiver alias or message

channel while in the transceiver alias or message channel
selection mode.

“SELC” is displayed on the key indicator. (IC-F70 series only)

Push to enter the transceiver alias selection mode.

• After the desired alias selection, push [PTT] to transmit a SelCall.

“CALA” is displayed on the key indicator. (IC-F70 series only)

Push to enter the transceiver alias selection mode.

• After the desired alias selection, push [PTT] to transmit a CallAlert.