Q-Logic 8200 Manuel D’Utilisation

1–Product Overview
Installing the QLogic Adapter vCenter Plug-in for ESX/ESXi

1-16

SN0054671-00  A

3.

Issue the vihostupdate command to install the offline bundle as follows:

For available options, refer to the vihostupdate page.

 

4.

Follow the on-screen instructions to complete the installation. You may need 
to reboot the ESXi system.

To update the QLogic Adapter CIM Provider after a prior VIB installation:

1.

Follow the instructions in the 

 

section to remove the existing VIB. 

2.

Follow the instructions in the 

 section to install the new VIB. 

After a system startup, the Small Footprint CIM Broker (SFCB) CIM object 
manager (CIMOM) in the ESX system should start automatically and load the 
QLogic Adapter CIM Provider when necessary. 

For ESX systems, you can also manually stop, start, or restart the SFCB CIMOM 
by issuing the following commands. 

To stop the SFCB CIMOM and the QLogic Adapter CIM Provider: 

To start the SFCB CIMOM and the QLogic Adapter CIM Provider: 

To restart the SFCB CIMOM and the QLogic Adapter CIM Provider: 

After starting the SFCB CIMOM, use a CIM client utility to query the QLogic 
Adapter CIM Provider for information.

For more details on vihostupdate, refer to the documents on the VMware 

vSphere Command-Line Interface Documentation page, located here: