Q-Logic 8200 Manuel D’Utilisation

2–Configuring NIC
Teaming/Bonding

2-34

SN0054671-00  B

QLogic recommends that you periodically save the configuration to prevent any 
accidental loss of network topology and settings. Current configuration including 
the teams, VLANs, and properties can be saved to a file. Restoring an earlier 
configuration results in the destruction of the current configuration.

To save a configuration:

1.

On the Team Management page under Teams and Adapters, right-click 
the Teams folder. 

2.

On the shortcut menu, click Save to File. 

3.

Enter a location to save the configuration. 

To restore a configuration:

1.

On the Team Management page under Teams and Adapters, right-click 
the Teams folder. 

2.

On the shortcut menu, click Restore From File. 

3.

Select a previously saved configuration file. 

You can view teaming and Ethernet statistics using the QConvergeConsole 
(QCC) CLI utility.

To view teaming statistics, issue the following command:

To reset the Ethernet statistics counter, issue the following command:

To display Ethernet port statistics, issue the following command:

To undo the reset of Ethernet statistics counters, issue the following command:

The Linux 

qlcnic

 driver supports all the standard bonding modes supported by 

the Linux bonding driver for bonding, failover, and aggregation. Refer to the Linux 
bonding driver documentation for additional details on the bonding modes.