Mitsubishi Electronics FL7000U Manuel D’Utilisation
EN-13
5
The password input screen appears. Enter the
password you set.
password you set.
•
The default password is admin.
(Note)
If you input a wrong password three successive
times, the Web browser is closed. In this case, repeat
from step 1.
If you input a wrong password three successive
times, the Web browser is closed. In this case, repeat
from step 1.
6
The ProjectorView main screen appears.
•
Some buttons may not be displayed. In this case,
select [Start] - [Control Panel] - [Java Plug-in] and
disable the cache.
select [Start] - [Control Panel] - [Java Plug-in] and
disable the cache.
ProjectorView (continued)
Press to display the Setup win-
dow. (See page 15.)
dow. (See page 15.)
Press to control the projector. For
the functions of these buttons,
see the user guide of the projec-
tor.
the functions of these buttons,
see the user guide of the projec-
tor.
Failures in the projector are indicated with dots. When you place the mouse cursor to a dot,
the indicated failure is described in the box at the bottom.
the indicated failure is described in the box at the bottom.
(Note)
When mute is on, you cannot change the lamp mode. If you try to change the lamp mode, a
dot appears next to “Command error” of WARNINGS.
When mute is on, you cannot change the lamp mode. If you try to change the lamp mode, a
dot appears next to “Command error” of WARNINGS.
[ProjectorView main screen]
Projector information is dis-
played. To display the projector
information, set LAN-Controlled
Mode to ON (1) (see page 10)
and enter necessary information
on the Projector Setup screen
(see page 15) in advance.
played. To display the projector
information, set LAN-Controlled
Mode to ON (1) (see page 10)
and enter necessary information
on the Projector Setup screen
(see page 15) in advance.