VTech 1930c Manuel D’Utilisation

30

FLASH

PAUSE

MEM/PGM

*

HOLD

OFF

PHONE

CID

REDIAL

INT.COM

CLR/DEL

MUTE

DIAL YOUR PHONE
NUMBER

PRESS

PRESS LOCATION
(00..20)

PHONE

MEM/PGM

Storing Memory (Speed) Dial
numbers
To program a speed dial location, do
the following:

¥ With  the  Handset  OFF,  enter  the

telephone number you wish to
store (20 Digits Maximum).

¥ Enter program mode by pressing

and holding  MEM/PGM . The
display will show the following:

¥ Enter the memory location (00..20)

you wish to store the number in.
After the second memory location
digit is entered, the unit will emit a
warbled tone (a short series of
beeps) to confirm successful
programming and exit program
mode.

If programming is unsuccessful the
unit will display:

Unsuccessful programming can result
from not correctly completing the
programming sequence. If this
message appears, simply repeat the
programming sequence.

¥ The number stored in memory

location 00 can be accessed by
pressing the one touch speed dial
Q.MEM  key on the Base Unit.

Dialing From Memory
From the Handset
¥ Press  PHONE  to get a line.

¥ Press MEM/PGM ; you're prompted

to enter a speed dial location
number:

¥ Enter  a  2 digit  location  number

(00..20).

¥ The number stored in that location

will be displayed and immediately
dialed.

          Or

¥ Beginning from the OFF mode,

press  MEM/PGM   followed by a
2 digit location number (00..20).