Hitachi vtfx850eukn Manuel D’Utilisation

Page de 66
20
To avoid erasing a
recording
Break off the safety tab
using a screwdriver or
similar tool.
To re-record on a cassette
which has its safety tab
removed
Cover the hole with
cellophane tape.
CASSETTE TAPES
Only use video cassettes with the 
mark in
this VCR.
Insertion
1
Push the cassette through the door until the VCR
mechanism pulls it into the compartment.
The VCR automatically turns on and the indicator
turns on when the cassette is in place.
Removal
1
Press the STOP/EJECT button on the VCR or the
EJECT button on the remote control handset.
The cassette will come partially out of the
compartment so you can pull it out.
• The indicator 
turns off when the cassette is
ejected.
• The cassette can be ejected with operate on or
off.
Remember that:
— The VCR automatically enters the playback
mode when a cassette without its safety tab is
inserted.
— When you press the REC button and a cassette
without the safety tab is inserted, "
" will
flash in the VCR display for several seconds and
the cassette will be ejected automatically.
— Be sure to check the safety tab before inserting
a cassette for the above reasons.
Type of video cassette
The table below shows the recording time of
different cassettes.
• Press the SP/LP button on the remote control
handset to select the recording speed before
recording. It is set to the correct speed
automatically during play, so it is not necessary
to change it over.
• It is recommended to record in the SP mode for
higher quality picture and sound.
TYPE
E-30
30 minutes
60 minutes
E-60
60 minutes
120 minutes
E-120
120 minutes
240 minutes
E-180
180 minutes
360 minutes
E-240
240 minutes
480 minutes
SPEED SELECT SWITCH
SP
LP
EJECT
1
4
2
5
6
3
7
8
9
0
SP/LP
STOP/EJECT