Hitachi VHS VT-M292A Manuel D’Utilisation

Basic Operations (Recording) 

 

36

recording is to begin. 

 If using a cable box the VCR cannot control, turn on the cable box and tune it to the 

channel you want to record before the time the recording is to begin. 

You can look back over any of the recordings you have preset, and if you need to, clear 
out any of the programs. Normal programs will clear automatically once recording is 
complete, but daily and weekly settings must be cleared out manually. 

 Press GUIDE, then press 3 for the PROGRAM REVIEW option. This brings up the 

screen settings for the first program. Keep pressing 3 to cycle through all the programs 
you have preset. 

 To remove a program, press CLEAR. The screen will display the next program, if 

there are more, or it will switch back to the main menu. 

When you have set up several timed recordings, it may occur that some of their times 
overlap. For example, this can happen if you are set up to record shows on a daily or 
weekly basis, and a special show comes on that you try to record during the same time 
slot. 

Shows with Same Starting Time 
If the overlapping programs start at the same time, the VCR records in order that they 
were programmed. If the shows are all scheduled to start at 7 AM, the VCR starts with 
the first program at 7 AM, and switches to what remains of the second program when 
the first program is done recording, and so on. 

Shows with Different Starting Times: 
If the programs start at different times, the VCR records the show scheduled to start 
earliest, records the entire show, then moves on to the show with the next earliest 
starting time. 
To avoid recording only bits and pieces of different overlapping shows, review your 
programming and delete those shows that are not essential.