Hitachi VHS VT-M292A Manuel D’Utilisation

Basic Operations (VCR Plus + Recording) 

 

43

 

Press number buttons 1, 2, or 3 to select ONE TIME, DAILY, or WEEKLY 
RECORDING. 
Important: Programming does not take effect unless you select one of these options. 
6. When the next screen comes up, choose between standard or extended tape speed 
by pressing the 5 button. This is also a good time to check the channel number-- it 
should be the one on which you usually watch the program at home. (If not, you need to 
check your VCR Plus+ channel setup.) 

 

7. Review the screen to be sure everything is set  as you want, then press GUIDE to 
complete your programming or continue with additional programs. 
When you have set up all the timed recordings you want: 

 Don't forget to load a videocassette (with the safety tab still attached) to record on. 
If using a cable box the VCR can control, turn on the cable box before the time the 

recording is to begin. 

 If using a cable box the VCR cannot control, turn on the cable box and tune it to the 

channel you want to record before the time the recording is to begin. 
Important: Your timed recording settings take effect when you turn off the power on the 
VCR.  

Caution on the VCR Plus+ recording 
After entering a VCR Plus + number, check the information displayed with the 
"PROGRAM REVIEW", if there is (are) any unnecessary program(s), please cancel or 
correct it (them).