Hitachi VM-E110A Manuel D’Utilisation

Before You Begin 

 

14

If you wish to connect this camcorder to a television that does not have audio/video 
input jacks you will need to use the optional RF adapter model VM-RF86A. 
The RF adapter can be purchased by calling the telephone number below. For your 
convenience Visa, Master Card, and American Express credit cards are accepted. The 
RF adapter can also be purchased by mail by sending either cheque, money order or 
your credit card information to the following address: 

 IN 

U.S.A. 

 

Hitachi Home Electronics (America), Inc. 

 

Parts Division 401 West Atresia Blvd. 

 

Compton, California. U.S.A.  90220 

 

Tel: 1-800-HITACHI (1-800-448-2244) 

For more information concerning the purchase of camcorder accessories, please see 
the optional accessory listing on page 55. 

2

ACTUAL LIST STARTS ON PAGE 51 

Avoid operating your camcorder immediately after moving it from a cold place to a 
warm, humid place. Give the camcorder 2 to 3 hours to stabilize in the ambient 
conditions of the surroundings before inserting a cassette. When moved from a cold 
place to a warm, humid place, moisture may condense on the head drum inside the 
machine. This moisture could cause the tape to stick to the headwheel and damage the 
headwheel or tape. 
When a small amount of moisture is sensed, "TAPE" flashes in the viewfinder. Remove 
the cassette and set the CAM/OFF/VIDEO switch to OFF, then wait for about one hour. 

Thread the ends of the provided shoulder strap through the slots at the back of the 
camcorder and thread through the shoulder straps' buckles. Please ensure that the 
straps are securely fastened before using the shoulder strap to carry the camcorder.