Volvo vhd Manuel D’Utilisation
218
Engine Start and Operation
Cruise Control
Do not use the cruise control in heavy
traffic, with ice/snow on the road or dur-
ing other unfavorable conditions. This
may lead to a loss of vehicle control,
causing a vehicle crash and can result in
personal injury or death.
traffic, with ice/snow on the road or dur-
ing other unfavorable conditions. This
may lead to a loss of vehicle control,
causing a vehicle crash and can result in
personal injury or death.
Engaging
The cruise control switches are located on
the turn signal lever.
the turn signal lever.
To engage and set desired speed:
1
Set the cruise control switch to ON.
2
When the desired vehicle speed has
been reached, momentarily press in
the SET+ or SET- switch on the end
of the lever.
been reached, momentarily press in
the SET+ or SET- switch on the end
of the lever.
3
If the speed needs to be increased,
press the SET+ switch. The vehicle
speed will increase as long as the
SET+ switch is pressed (speed will not
increase above the maximum pro-
grammed speed). Release when the
desired speed has been reached.
press the SET+ switch. The vehicle
speed will increase as long as the
SET+ switch is pressed (speed will not
increase above the maximum pro-
grammed speed). Release when the
desired speed has been reached.
4
If the speed needs to be decreased,
press the SET- switch. The vehicle
speed will decrease as long as the
SET- switch is pressed (speed will not
decrease below the minimum pro-
grammed speed). Release when the
desired speed has been reached.
press the SET- switch. The vehicle
speed will decrease as long as the
SET- switch is pressed (speed will not
decrease below the minimum pro-
grammed speed). Release when the
desired speed has been reached.
NOTE! The cruise control cannot be en-
gaged at speeds below approximately
30 mph (45 km/h) and engine speed below
approximately 1000 r/min.
gaged at speeds below approximately
30 mph (45 km/h) and engine speed below
approximately 1000 r/min.
W3002499