ONKYO dr-s501 Manuel D’Utilisation

11

Notes:
• If the remote controller doesn’t work reliably, try 

replacing both batteries.

• Don’t mix new and old batteries, or different types of 

batteries.

• If you intend not to use the remote controller for a long 

time, remove the batteries to prevent possible leakage 
and corrosion.

• Flat batteries should be removed as soon as possible to 

prevent possible leakage and corrosion.

To use the remote controller, point it at the DVD 
receiver’s remote control sensor, as shown below.

Notes:
• The remote controller may not work reliably if the 

DVD receiver is subjected to bright light, such as 
direct sunlight or inverter-type fluorescent lights. 
Keep this in mind when installing the DVD receiver.

• If another remote controller of the same type is used in 

the same room, or the DVD receiver is installed close 
to equipment that uses infrared rays, the remote con-
troller may not work reliably.

• Don’t put anything, such as a book, on the remote con-

troller, because the buttons may be pressed inadvert-
ently, thereby draining the batteries.

• The remote controller may not work reliably if the 

DVD receiver is installed in a rack behind colored 
glass doors. Keep this in mind when installing the 
DVD receiver.

• The remote controller will not work if there’s an 

obstacle between it and the DVD receiver’s remote 
control sensor.

Remote control sensor

DVD receiver

Approx. 5 m