DOD fx75c-01 Manuel D’Utilisation

What the FX75C Stereo Flanger Does
The FX75C splits your guitar signal, adds a short
delay to one of the signals, and then changes the
delay time at an even rate.This results in a slight
fluctuation in pitch of the delayed signal The FX75C
then adds a “whooshing up, and down” sound to
your guitar by incorporating regeneration into the
delayed signal.

Connecting The FX75C
Connect your guitar to the input of the FX75C.
Connect the output of the FX75C to the input of
your amplifier (or to the input of another effect
device you may be running). For stereo sound, con-
nect the Stereo output to the input of a second
amplifier..To eliminate the need for a 9 volt battery,
connect the PS200R to the AC power jack on the
FX75C

DOD Electronics Corporation

8760 S.Sandy Parkwa

Sandy,UT 84070

T elephone (801) 566-8800

Fax (801) 566-7005

International Phone (801) 568-7642

International Fax (801) 568-7638

onics Corp.

The specifications in this manual ar

e subject to

change without notice.

FX75C 18-1075-A#01

Features
• LED indicator shows status of effect and battery.
• Stereo effect generation from mono input.
• Active switching for noiseless operation.
• Easy access battery compartment.
• Adapter jack for AC operation.
• Rugged die-cast metal chassis.
• Three year limited warranty.
• Rubber non-skid bottom.

Controls
Level - This knob adjusts the overall volume level of

the Flange Effect.

Speed - This knob adjusts the rate of the modulat-

ing delay time.

Depth - This knob adjusts the intensity of the mod-

ulation

Regen - This knob sets the amount of regeneration

which is perceived as the up and down
motion.

Footswitch - Bypasses, and re-engages the effect

LED Indicator - Lights when the Flange is active and

is not lit when the effect is
bypassed.

Jacks - Input, Output, AC adapter (use only the

PS200R).

Declaration of Conformity

Manufacturer’s

Name:

DOD Electronics Corporation

Manufacturer’s

Address:

8760 S. Sandy Parkway

Sandy, Utah 84070, USA

declares that the product:

Product Name:

FX75C

Product Options:

All(Requires a Class II power adapter

that conforms to the requirements of

EN60065, EN60742, or equivalent).

Conforms to the following Product Specifications:

Safety:

EN 60065 (1993)

IEC65 (1985) with amendments 1, 2, 3

EMC:

EN 55013 (1990)

EN 55020 (1991)

Supplementary Information:

The product herewith complies with the requirements of the Low

Voltage Directive 72/23/EEC and the EMC Directive 89/336/EEC

as amended by Directive 93/68/EEC.

DOD Electronics Corporation

Vice President of Engineering

8760 S. Sandy Parkway

Sandy, Utah 84070, USA

December 29, 1999

European Contact: Y

our local DODSales and Service Office or

International Sales Office

8760 S, Sandy Parkway

Sandy, Utah 84070, USA

T el: (801) 568-7638

Fax: (801) 568-7642

Operation of the FX75C
The FX75C was designed to give you the thickness
and animation typical of the classic Flange effect.The
following sample settings are starting points for you
to begin making your own flange effect sounds.

Settings for a tremolo sound:

Settings for a thick flange:

Slow sweep for a “tubular” pipe sound:

Computer Voice (weird sound):

rranty

1.The war

ranty registration car

d must be mailed within ten

days of pur

chase date to validate this warranty

2.DOD war

rants this product when used solel

y within the

U.S.,

to be free fr

om defects in materials and w

orkmanship

under normal use and service

3.DOD liability under this war

ranty is limited to repairing

or replacing def

ective materials that sho

w evidence of

defect,

pro

vided the product is r

eturned through the original

dealer ,wher

e all parts and labor will be co

red up to a

period of three y

ears.The compan

y shall not be liable fo

any consequential damage as a r

esult of the product’

s use in

any cir

cuit or assembly.

4.Pr

oof-of-purchase date is consider

ed to be the burden of

the consumer .

5.DOD r

eserves the right to mak

e changes in design or

make ad

ditions to or impro

vements upon this pr

oduct with-

out incurring an

y obligation to install the same on products

previousl

y manufactur

ed.

6.The f

ore

going is in lieu of all other war

ranties,expr

essed

or implied,and DOD neither assumes nor authorizes an

person to assume for it an

y obligation or liability in connec-

tion with the sale of this product.

In no event shall DOD or

its dealers be liable for special or consequential damages or

from an

y delay in the perf

ormance of this warranty due to

causes beyond their contr

ol.

Important Notes
• The FX75C battery is in use whenever you are

plugged into the INPUT jack.To extend the life of
the battery, be sure to disconnect the input when
the FX75C is not in use.

• Remove the battery when the FX75C will not be

used for an extended period of time.This will pre-
vent possible damage due to leaking battery fluids.

• Battery replacement is indicated when the FX75C

fails to switch in and out, or when the LED stays
lit.

• Keeping the battery in the FX75C while using an

AC adapter will provide continuous operation in
the event of a power failure.

• Use of any power adapter other than the PS200R

will void the warranty of this product.

• No user serviceable parts inside. Removal of the

bottom plate will void the warranty of this prod-
uct. Should your FX75C require servicing, contact
your authorized DOD dealer for return/repair
information.

STEREO

FLANGER

75C

Printed in China