Crestron qm-rmcrx Manuel D’Utilisation
Crestron QM-RMCRX
QuickMedia™ Receiver/Processor
To terminate the serial console mode, press the HW-R button, or cycle the
power.
power.
NOTE: Pressing <F10> (or selecting Functions | 2-Series | Hard Reset) in
Viewport for the master control system may cause errors if both the program
and the console mode are using the same COM port.
Viewport for the master control system may cause errors if both the program
and the console mode are using the same COM port.
For more information on slave mode operation, refer to the latest revision of the
2-Series Master/Slave Modes Reference Guide (Doc. 6164).
2-Series Master/Slave Modes Reference Guide (Doc. 6164).
Configuring the QM-RMCRX
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website (www.crestron.com). To post a question or view
questions you have submitted to Crestron’s True Blue Support, log in at
http://www.crestron.com/accounts/login.asp. First-time users will need to
establish a user account.
section of the Crestron website (www.crestron.com). To post a question or view
questions you have submitted to Crestron’s True Blue Support, log in at
http://www.crestron.com/accounts/login.asp. First-time users will need to
establish a user account.
Use the Crestron programming tools Crestron SystemBuilder™ and Crestron
Digital Media Tools™ to create a control program for the QM-RMCRX control
system.
Digital Media Tools™ to create a control program for the QM-RMCRX control
system.
The higher level of SIMPL Windows flexibility requires a much greater degree
of programming expertise and is not recommended for this application.
However, complete SIMPL Windows information is included in the Appendix
of this Operation Guide. Use the advanced techniques available in SIMPL
Windows to customize the job only if necessary.
of programming expertise and is not recommended for this application.
However, complete SIMPL Windows information is included in the Appendix
of this Operation Guide. Use the advanced techniques available in SIMPL
Windows to customize the job only if necessary.
Earliest Version Software Requirements for the
PC
PC
NOTE: Crestron recommends that you use the latest software to take advantage
of the most recently released features. The latest software is available from the
Downloads | Software Updates section of the Crestron website
(www.crestron.com).
of the most recently released features. The latest software is available from the
Downloads | Software Updates section of the Crestron website
(www.crestron.com).
Following are the minimum software requirements for the PC:
• SIMPL Windows version 2.05.17. (Also requires SIMPL+ Cross
Compiler version 1.1 or later).
• Crestron Digital Media Tools™ version 2.0 or later for simplified audio
control.
• Crestron Database version 16.0.5 or later for use with SIMPL
Windows.
• (Optional, but highly recommended) Crestron SystemBuilder™ version
1.0 software or later for automatic residential and commercial
programming of the QM-RMCRX as a control system. As of press
time, this version of Crestron SystemBuilder had not been released.
Please check the Crestron FTP site.
programming of the QM-RMCRX as a control system. As of press
time, this version of Crestron SystemBuilder had not been released.
Please check the Crestron FTP site.
• (Optional, for use with Crestron SystemBuilder) Crestron Vision Tools
Pro-e (VT Pro-e) software version 3.2.0.0 or later for designing
Operations Guide – DOC. 6236A
QuickMedia™ Receiver/Processor: QM-RMCRX
• 25