Haier HSL04WNA Manuel D’Utilisation

English

9. Align the pin of the top hinge with top hole on the left side of the door and

push into place. Replace the screws in the upper hinge bracket but do not
tighten all the way. (see fig. # 2)

10. Make sure the door closes easily but forms a tight seal. Adjust the door as

needed. Once you are satisfied with the door alignment, completely tighten
the upper door hinge screws.

11. Replace the hinge cover, insert the screw and tighten completely. (see fig. #

2)

12. If the door does not close properly, refer to the section titled “Door

Alignment”.

door pin

lower hinge bracket

screw hole plug

Fig. 3

screw holes plug

lower hinge bracket

door pin