Hanna Instruments c 99 Manuel D’Utilisation
27
SPECIFICATIONS
Range
0.00 to 3.00 mg/L
Resolution
0.01 mg/L
Accuracy
±0.04 mg/L ±4% of reading
Typical EMC
±0.01 mg/L
Deviation
Light Source
Light Source
Tungsten lamp with narrow band interference
filter @ 420 nm
Method
Adaptation of the ASTM Manual of Water and
Environmental Technology, D1426-92
Environmental Technology, D1426-92
, Nessler
method. The reaction between ammonia and
reagents causes a yellow tint in the sample.
REQUIRED REAGENTS
Code
Description
Quantity
HI 93700A-0
First Reagent
4 drops (6 drops in seawater)
HI 93700B-0
Second Reagent
4 drops (10 drops in seawater)
REAGENT SETS
HI 93700-01 Reagents for 100 tests
HI 93700-03 Reagents for 300 tests
For other accessories see page 141.
HI 93700-03 Reagents for 300 tests
For other accessories see page 141.
MEASUREMENT PROCEDURE
• Select the program number corresponding to Ammonia LR on the
secondary LCD by pressing PROGRAM W and V.
• Fill the cuvet with 10 mL of unreacted sample, up
to the mark, and replace the cap.
• Place the cuvet into the holder and
ensure that the notch on the cap is
positioned securely into the groove.
positioned securely into the groove.
• Press ZERO and “SIP” will blink on the display.
• Wait for a few seconds and the display will
show “-0.0-”. Now the meter is zeroed
and ready for measurement.
and ready for measurement.
Ammonia LR
AMMONIA LOW RANGE
AMMONIA LOW RANGE
AMMONIA LOW RANGE
AMMONIA LOW RANGE
AMMONIA LOW RANGE
10 mL