Konica Minolta bizhub 160 161 um 1.1.0 Manuel D’Utilisation
When a message appears
6
bizhub 160/161
6-29
6.10
When incorrect copies are produced
Symptom
Possible cause
Action
The image is too light.
The density level for the Auto
setting is set to “LIGHT”.
setting is set to “LIGHT”.
Adjust the setting for DENSI-
TY LEVEL (A) in the utility
mode. (p. 5-19)
Otherwise, cancel the “Auto”
density setting, and then man-
ually select the desired densi-
ty setting. (p. 4-12)
TY LEVEL (A) in the utility
mode. (p. 5-19)
Otherwise, cancel the “Auto”
density setting, and then man-
ually select the desired densi-
ty setting. (p. 4-12)
The density level is set to light.
Does the message
TONER
EMPTY
appear in the dis-
play?
Change the toner cartridge
with a new one. (p. 6-7)
with a new one. (p. 6-7)
The paper is damp.
Change the paper.
The image is too dark.
The density level for the Auto
setting is set to dark.
setting is set to dark.
Adjust the setting for DENSI-
TY LEVEL (A) in the utility
mode. (p. 5-19)
Otherwise, cancel the “Auto”
density setting, and then man-
ually select the desired densi-
ty setting. (p. 4-12)
TY LEVEL (A) in the utility
mode. (p. 5-19)
Otherwise, cancel the “Auto”
density setting, and then man-
ually select the desired densi-
ty setting. (p. 4-12)
The density level is set to
dark.
dark.
The original glass surface is
dirty.
dirty.
Wipe the original glass clean
with a soft, dry cloth.
with a soft, dry cloth.
The original is not held tightly
against the original glass.
against the original glass.
Place the original in position
so that it is held tightly against
the original glass.
so that it is held tightly against
the original glass.
The copy is blurry.
The paper is damp.
Change the paper.