Kobe Range Hoods CH7936SQB Manuel D’Utilisation

Page de 102
 
 
 
 IMPORTANT SAFETY INSTRUCTIONS  
 
- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - 
 
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL 
INJURY, OBSERVE THE FOLLOWING:
 
 
1)  Installation and electrical wiring must be done by qualified professionals and in accordance 
with all applicable codes and standards, including fire-rated construction. 
2)  When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or 
other hidden utilities. 
3)  Ducted fans must be vented to the outside. 
a)  Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT 
SERVICE PANEL. 
b)  Clean all grease laden surfaces frequently.  To reduce the risk of fire and to disperse air 
properly, make sure to vent air outside.   DO NOT vent exhaust air into wall spaces, 
attics, crawl spaces or garages. 
 
NOTE  -  This warranty is void  without an authorized agent’s receipt or if 
unit is damaged due to misuse, poor installation, improper use, 
mistreatment, negligence or any other circumstances beyond the 
control of KOBE RANGE HOODS authorized agents.  Any repair 
carried out without the supervision of KOBE RANGE HOODS 
authorized agents will automatically void the warranty. 
 
 
 
 
-  KOBE RANGE HOODS will not be held responsible for any 
damages to personal property or real estate or any bodily injuries 
whether caused directly or indirectly by the range hood. 
 
WARNING
:  TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A 
RANGE TOP GREASE FIRE: 
 
1.  Keep  all  fan, baffle/spacer/filter/oil tunnel/oil container  and grease-laden surfaces clean.  
Grease should not be allowed to accumulate on fan,  baffle/spacer/filter/oil tunnel/oil 
container. 
2.  Always turn hood ON when cooking. 
3.  Use high settings on cooking range ONLY when necessary.   
4.  Do not leave cooking range unattended when cooking. 
5.  Always use cookware and utensils appropriate for the type and amount of food prepared. 
6.  Use this unit only in the manner intended by the manufacturer. 
7.  Before servicing, switch power off at service panel and lock service panel (if possible) to 
prevent power from switching on accidentally. 
8.  Clean ventilating fan frequently.