Honeywell av8or Manuel D’Utilisation
AV8OR User’s Guide Aviation Mode Operation
Basic Operation
Basic Operation
Pub. No D200803000008 Page 3-4 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
The user can browse the Bendix/King web page
at
at
to see if a newer version of the
software or database is available.
If the OK soft key is pushed to acknowledge the Jeppesen database,
the Aviation Map page is displayed, as shown in Figure 3-7.
the Aviation Map page is displayed, as shown in Figure 3-7.
If the DEMO MODE soft key is tapped, then AV8OR will enter a
simulation mode.
simulation mode.
Demo Mode
Demo Mode lets the user become familiar with handling the AV8OR
system on the ground by running in a simulation mode. When the
AV8OR is in Demo Mode, it performs the same as when it is
receiving valid sensor signals to use the various functions. Demo
Mode can only be activated on the final title page during startup, as
shown in Figure 3-5. After tapping the DEMO MODE soft key, the
simulator shows a caution page which must be acknowledged before
continuing.
system on the ground by running in a simulation mode. When the
AV8OR is in Demo Mode, it performs the same as when it is
receiving valid sensor signals to use the various functions. Demo
Mode can only be activated on the final title page during startup, as
shown in Figure 3-5. After tapping the DEMO MODE soft key, the
simulator shows a caution page which must be acknowledged before
continuing.
Figure 3-6: Demo Mode
Tap the OK soft key to acknowledge the caution and then the Map
page is displayed.
page is displayed.