Fujitsu fi-5015C Manuel D’Utilisation
vi
CAUTION
Do not install the scanner on unstable
surfaces.
surfaces.
Do not block the ventilation ports.
Do not place heavy objects or stand on top
of the scanner.
of the scanner.
Firmly insert the power plug.
Avoid any contact when scanner is in use.
Do not use the scanner immediately after
moving it from a cold place into a warm
room.
moving it from a cold place into a warm
room.
Before moving the scanner, disconnect the
power plug from the power outlet.
power plug from the power outlet.
Protect the scanner from static electricity.
Do not use aerosol sprays near the
scanner.
scanner.
Disconnect the power plug from the power
outlet when the scanner is not used for a
long period of time.
outlet when the scanner is not used for a
long period of time.
Do not install the scanner in the direct
sunlight.
sunlight.
Before moving the scanner, make sure the
shipping lock is locked.
shipping lock is locked.
Make sure that the scanner is installed on a
flat, level surface and that none of its parts
extend beyond the surface top, such as a desk
or table. Do not install the scanner on
unstable surfaces. Install the scanner on a level
surface that is free of vibration to prevent it
from falling.
Install the scanner on a strong surface that will
support the weight of the scanner and other
devices.
flat, level surface and that none of its parts
extend beyond the surface top, such as a desk
or table. Do not install the scanner on
unstable surfaces. Install the scanner on a level
surface that is free of vibration to prevent it
from falling.
Install the scanner on a strong surface that will
support the weight of the scanner and other
devices.
Do not block the ventilation ports. Blocking the
ventilation ports generates heat inside of
scanner, which may results in fire or scanner
failure.
ventilation ports generates heat inside of
scanner, which may results in fire or scanner
failure.
Do not place heavy objects on the scanner or
use the scanner's surface top to perform other
work. Improper installation might cause injuries
and equipment failure.
use the scanner's surface top to perform other
work. Improper installation might cause injuries
and equipment failure.
Firmly insert the power plug as far it can go into
the power outlet.
the power outlet.
Avoid touching any scanner mechanism during
scanning since this may cause injuries.
scanning since this may cause injuries.
Do not use the device immediately after
moving it from a cold place into a warm room.
This may cause condensation, which might
lead to scanning errors. Let the device dry
about one or two hours before you use it.
moving it from a cold place into a warm room.
This may cause condensation, which might
lead to scanning errors. Let the device dry
about one or two hours before you use it.
Do not move the scanner with the power and
interface cables connected as this might
damage the cables, causing fire, electric shock
or injuries. Before moving the scanner, be sure
to disconnect the power plug from the power
outlet, and all other data cables. Make sure that
the floor is free of any obstruction.
interface cables connected as this might
damage the cables, causing fire, electric shock
or injuries. Before moving the scanner, be sure
to disconnect the power plug from the power
outlet, and all other data cables. Make sure that
the floor is free of any obstruction.
Install the scanner away from strong magnetic
fields and other sources of electronic noise.
Also, protect the scanner from any static
electricity as this might cause the scanner to
malfunction.
fields and other sources of electronic noise.
Also, protect the scanner from any static
electricity as this might cause the scanner to
malfunction.
Do not use aerosol sprays to clean the scanner.
Aerosol sprays cause dirt and dust to enter the
scanner, resulting scanner failure and
malfunction.
Aerosol sprays cause dirt and dust to enter the
scanner, resulting scanner failure and
malfunction.
When the scanner is not going to be used for a
long period of time, be sure to disconnect the
power plug from the power outlet for safety.
long period of time, be sure to disconnect the
power plug from the power outlet for safety.
Do not install the scanner under direct sunlight or
near heating apparatus. Doing so might cause
excessive heat to build up inside the scanner,
which can cause scanner trouble or even fire.
Install the scanner in a well-ventilated location.
near heating apparatus. Doing so might cause
excessive heat to build up inside the scanner,
which can cause scanner trouble or even fire.
Install the scanner in a well-ventilated location.
When moving the scanner, be sure to lock the
shipping lock in order to prevent damages to
the scanner.
shipping lock in order to prevent damages to
the scanner.