Xerox Pro 385 Manuel D’Utilisation
1-36
Getting Started
6
Press the Left or Right button repeatedly until you find the desired
mode:
mode:
l
NORMAL–use with documents of average or normal contrast.
l
DARKEN–use with documents with low contrast or light images.
l
LIGHTEN–use with documents with high contrast or dark images.
l
PHOTO–for obtaining maximum image quality with documents
that contain pictures or photographs with shades of gray.
that contain pictures or photographs with shades of gray.
7
Press Enter to select the desired mode. The SOUND CONTROL ?
setup menu selection is displayed. Refer to the next section Sound
Control, for configuration details.
setup menu selection is displayed. Refer to the next section Sound
Control, for configuration details.
8
To return to Standby mode, press the Stop button.
Sound Control
You can choose an alarm tone to sound when abnormal operating conditions
occur; for example, when out of paper, or if a cover is open. You can also
set the machine to beep when any key is pressed.
occur; for example, when out of paper, or if a cover is open. You can also
set the machine to beep when any key is pressed.
1
Press the Menu button, then press the System Setup button on the One-
Touch keypad. The display indicates RINGER VOLUME ?.
Touch keypad. The display indicates RINGER VOLUME ?.
2
Press the Up or Down button until you find SOUND CONTROL ?.
3
Press Enter. The display prompts you to turn the alarm sound ON or
OFF.
OFF.
4
Press 1 to turn the sound ON or 2 to turn it OFF. You can also press the
Right or Left button to choose ON or OFF, then press Enter to
confirm.
Right or Left button to choose ON or OFF, then press Enter to
confirm.