Furuno gd-1700c Manuel D’Utilisation
5. CUSTOMIZING YOUR UNIT
5-15
5.4
Data Boxes Setup
You may select the data to show in the data boxes for the plotter, radar and
sounder displays. Six boxes may be displayed in case of small size data box and
two for large size data box.
1. Display the plotter, radar or sounder display, whichever you want to set.
2. Press the [MENU] key to open the main menu.
3. Press one of the following sets of soft keys depending on the display selected
sounder displays. Six boxes may be displayed in case of small size data box and
two for large size data box.
1. Display the plotter, radar or sounder display, whichever you want to set.
2. Press the [MENU] key to open the main menu.
3. Press one of the following sets of soft keys depending on the display selected
at step 1.
a) Plotter mode:
PLOTTER SETUP, D. BOX
b) Radar mode:
RADAR DISPLAY SETUP, D. BOX
c) Sounder mode:
SOUNDER MENU, D. BOX
▲
DATA
BOX
BOX
EDIT
RETURN
DATABOX SIZE
SMALL
POSITION
SMALL
POSITION
ON
WAYPOINT
OFF
COG
ON
SOG
ON
STW
OFF
BEARING
OFF
RANGE
OFF
TIME TO GO
OFF
ETA
OFF
TEMPERATURE OFF
DEPTH
DEPTH
OFF
TRIP LOG
ON
DATE
OFF
TIME
OFF
WIND
OFF
Data box menu
4. Use the cursor pad to select an item, then press the EDIT soft key.
5. Select ON or OFF as desired.
6. Press the ENTER soft key or the [ENTER] knob to register your selection.
7. Repeat steps 4-6 to turn other items on or off. Six items may be set to ON for
5. Select ON or OFF as desired.
6. Press the ENTER soft key or the [ENTER] knob to register your selection.
7. Repeat steps 4-6 to turn other items on or off. Six items may be set to ON for
small data boxes; two for large data boxes.
8. Press the [MENU] key to close the menu.