Furuno gd-1700c Manuel D’Utilisation
5. CUSTOMIZING YOUR UNIT
5-30
5.9 Sounder
Setup
This section shows you how to customize your network sounder to your liking.
You can set fish alarm sensitivity, fine tune sensor data, etc.
You can set fish alarm sensitivity, fine tune sensor data, etc.
5.9.1 System
setup
1. Show the sounder display, then press the [MENU] key.
2. Press the SOUNDER SYSTEM SETUP soft key.
2. Press the SOUNDER SYSTEM SETUP soft key.
SYSTEM
SETUP1
SETUP1
RETURN
SENSOR
SETUP
SETUP
EDIT
FISH ALARM LEVEL
MEDIUM
TRANSMISSION
ON
TVG-HF
5
TVG-LF
5
ECHO OFFSET-HF
+00
ECHO OFFSET-LF
+00
BOTTOM LEVEL-HF
+000
BOTTOM LEVEL-LF
+000
KP PULSE
INTERNAL
SMOOTHING
OFF
TLL OUTPUT
ON
SYSTEM
SETUP2
SETUP2
PREV.
PAGE
PAGE
SENSOR
SETUP
SETUP
EDIT
STC-HF
00
STC-LF
00
FREQ. ADJ.-HF
+00.0 %
FREQ.ADJ.-LF
+00.0 %
TARGET ECHO
NORMAL
NEXT
PAGE
PAGE
Page 1
Page 2
Sounder system setup menu
Sounder system setup menu description
Item Description
Settings
Fish Alarm Level
Sets the fish alarm sensitivity;
that is, the minimum echo
strength which will trigger the fish
alarms.
that is, the minimum echo
strength which will trigger the fish
alarms.
High:
Orange and stronger echoes
(strongest echoes on monochrome
model) trigger the alarm.*
Medium:
model) trigger the alarm.*
Medium:
Yellow and stronger
echoes (medium strength echoes on
monochrome model) trigger the
alarm.*
Low:
monochrome model) trigger the
alarm.*
Low:
Green and stronger echoes
(weak echoes on monochrome
mode) trigger the alarm.*
* = 8-color display
mode) trigger the alarm.*
* = 8-color display
Transmission
Turns TX power on/off.
On, Off
(Continued on next page)