Furuno gd-1700c Manuel D’Utilisation
7. MAINTENANCE, TROUBLESHOOTING
7-2
7.2 Replacement
of
Fuse
The fuse on the power cable protects the equipment from reverse polarity of the
ship’s mains and equipment fault. If the fuse blows, find out the cause before
replacing it. Use the correct fuse (10A for 12 V, 5A for 24 V). Using the wrong
fuse will damage the equipment and void the warranty.
ship’s mains and equipment fault. If the fuse blows, find out the cause before
replacing it. Use the correct fuse (10A for 12 V, 5A for 24 V). Using the wrong
fuse will damage the equipment and void the warranty.
CAUTION
Use the proper fuse.
Use of a wrong fuse can cause fire or
damage the equipment.
damage the equipment.
7.3 Replacement
of
Batteries
Battery on circuit board
A battery fitted on a circuit board inside the display unit preserves data when the
equipment is turned off, and its life is about three years. When its voltage is low
the battery icon (
equipment is turned off, and its life is about three years. When its voltage is low
the battery icon (
) appears at the top of the display. When the icon appears,
contact your dealer to request replacement of the battery.
Parts Name
Type
Code No.
Lithium battery
CR2450-F2 ST2L
000-144-941
Batteries in remote controller
The remote controller has two AA batteries. If the distance from which the
remote controller can be operated has decreased, change the battery.
Note: Replace all batteries together. Do not mix old and new batteries.
remote controller can be operated has decreased, change the battery.
Note: Replace all batteries together. Do not mix old and new batteries.
WARNING
Ensure battery polarity is correct.
Wrong polarity may cause the batteries to
explode.
explode.