Kenwood cm551-55825iss3 cm450 & cm550 english only Manuel D’Utilisation
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
www.kenwoodworld.com
55825/3
CM450 series
CM550 series
You may notice fragments of tea
leaves in the dispensed tea – this
is normal.
After use always wash the parts
thoroughly. If alternating between
tea and coffee making, take extra
care to ensure the coffee tank and
permanent filter are well washed
and rinsed.
You may wish to purchase an
additional permanent filter and
coffee tank to have dedicated
parts for tea and coffee making.
See ‘service’.
leaves in the dispensed tea – this
is normal.
After use always wash the parts
thoroughly. If alternating between
tea and coffee making, take extra
care to ensure the coffee tank and
permanent filter are well washed
and rinsed.
You may wish to purchase an
additional permanent filter and
coffee tank to have dedicated
parts for tea and coffee making.
See ‘service’.
CM550 series only
to set the clock.
1 Plug in the BrewMaster. The
numbers on the clock will flash
until the time of day is set or one
minute elapses.
until the time of day is set or one
minute elapses.
2 To set the time of day:
●
Press the “H” button to set the
current hour with AM or PM.
current hour with AM or PM.
●
Press the “M” button until you
reach the current time.
reach the current time.
to select 12 or 24 hour
clock.
clock.
To change from a 12 hour clock
(AM/PM) to a 24 hour clock or
vice versa. Press the “H” and “M”
buttons simultaneously and whilst
holding them in press the “Prog”
button at the same time.
(AM/PM) to a 24 hour clock or
vice versa. Press the “H” and “M”
buttons simultaneously and whilst
holding them in press the “Prog”
button at the same time.
to programme automatic
brew
1 Set the clock to the correct time of
day.
2 Press the “Prog” button and the
digits will flash.
3 Press the “H” and “M” buttons
until the desired brewing time is
reached.
reached.
4 Press the “Prog” button to confirm
setting. The digits will stop
flashing and return to the set time
flashing and return to the set time
of day.
5 Push the “Auto/ON/OFF” button
once and “PRO” will show in the
display indicating that the brew
cycle will begin at the set time.
The light will flash on and off.
Note: if the “Auto/ON/OFF”
button is pushed twice, brewing
will begin immediately.
display indicating that the brew
cycle will begin at the set time.
The light will flash on and off.
Note: if the “Auto/ON/OFF”
button is pushed twice, brewing
will begin immediately.
●
To check the programmed time,
press the “Prog” button and the
programmed time will flash. Press
“Prog” button again to return back
to the clock.
press the “Prog” button and the
programmed time will flash. Press
“Prog” button again to return back
to the clock.
care and cleaning
●
Always switch off, unplug and
allow to cool before cleaning.
allow to cool before cleaning.
●
Never put the machine in water or
let the cord or plug get wet.
let the cord or plug get wet.
●
Don’t wash parts in the
dishwasher, except the filter
holder and coffee tank.
dishwasher, except the filter
holder and coffee tank.
coffee tank, drip tray, filter
holder and permanent filter
●
Wash, then dry thoroughly.
body
●
Wipe with a damp cloth, then dry.
Don’t use abrasives – they’ll
scratch the plastic.
Don’t use abrasives – they’ll
scratch the plastic.
descaling
Regularly descale to optimise your
BrewMaster’s performance. We
recommend once a month for
heavy usage.
BrewMaster’s performance. We
recommend once a month for
heavy usage.
to descale
1 Buy a suitable descaler.
2 Descale the machine following the
2 Descale the machine following the
instructions on the descaler.
3 After descaling, run at least 2 lots
of water through the machine to
clean it out. Each time pour one
coffee tank of cold water filled to
the “MAX” level into the water
reservoir.
clean it out. Each time pour one
coffee tank of cold water filled to
the “MAX” level into the water
reservoir.
4 Wash the parts.
service
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised
Kenwood repairer.
safety reasons, be replaced by
Kenwood or an authorised
Kenwood repairer.
UK
If you need help with:
●
using your machine or
●
servicing, spare parts or repairs (in
or out of guarantee)
or out of guarantee)
call Kenwood Customer Care on
023 92392333. Have your
model number ready - it’s on
the underside of the BrewMaster.
model number ready - it’s on
the underside of the BrewMaster.
●
spares and attachments
call 0870 2413653. To buy an
additional permanent filter quote
part/reference number 683747
and quote 683591 for the black
coffee tank and 683802 for the
silver coffee tank.
part/reference number 683747
and quote 683591 for the black
coffee tank and 683802 for the
silver coffee tank.
●
other countries
Contact the shop where you
bought your machine
bought your machine
guarantee
If your BrewMaster goes wrong
within one year from the date you
bought it, we will repair it (or
replace it if necessary) free of
charge provided:
within one year from the date you
bought it, we will repair it (or
replace it if necessary) free of
charge provided:
●
you have not misused, neglected
or damaged it;
or damaged it;
●
it has not been modified (unless by
Kenwood);
Kenwood);
●
it is not second-hand;
●
it has not been used
commercially;
commercially;
●
you have not fitted a plug
incorrectly; and
incorrectly; and
●
you supply your receipt to
show when you bought it.
This guarantee does not affect
your statutory rights.
your statutory rights.
12
10
8
6
4
2