Konica Minolta kn-304 Manuel D’Utilisation
Chapter 1 KN-304 Network Board overview
KN-304 Network Board 1-3
■
How to use the CD-ROM provided
The CD-ROM contains some utility programs used for the KN-304 Network Board and the instruction manual
(same as this) in the form of PDF (Portable Document Format). The CD-ROM is compatible with Windows
95/98/NT. The software of English language version contained in the CD-ROM includes the following.
MAP (Management Access Program)
This allows to detect the network printers connected by IP/IPX and enables access to Web
utilities incorporated in the KN-304 Network Board to set up the network and printers with the
aid of the Web browser.
IP-P2P
This enables peer-to-peer printing by TCP/IP from Windows 95/98.
■
Network setting procedures
Before you use the KN-304 Network Board, it is needed to set up the system and perform some preparatory
tasks. The procedures depend on the system environment.
●
For peer-to-peer printing from Windows 95/98
A printer can be connected in the form of so-called “peer-to-peer” to produce printout without using a print
server in a LAN (Local Area Network) consisting only of Windows 95/98. The setup procedure is as follows.
See Chapter 2, Setting up from the LCD Panel, for more detail of Step 1, and Chapter 3, Peer-to-Peer
Printing (Windows 95/98), for Steps 2-4.
Set up the KN-304 Network Board for TCP/IP from the Konica 7020 series machine’s LCD
panel.
Set up your computer (Windows 95/98) for TCP/IP.
Install “IP-P2P” from the CD-ROM provided.
Install the printer driver.
●
For lpr/lpd printing from Windows NT
To produce printout by lpr/lpd from Windows NT, the setup procedure is as follows. See Chapter 2, Setting
up from the LCD Panel, for more detail of Step 1, and Chapter 4, Printing by lpd/lpr, for Steps 2-4.
Set up the KN-304 Network Board for TCP/IP from the Konica 7020 series machine’s LCD panel.
Set up your computer (Windows NT) for TCP/IP.
Install “Microsoft TCP/IP Print” if not installed yet.
Install the printer driver.