Konica Minolta kn-304 Manuel D’Utilisation
Chapter 4 Printing by lpd/lpr (Windows NT)
4-4 KN-304 Network Board
Designate the CD-ROM drive as [Copy manufacturer’s files from] and click the [Browse...]
button.
Open the [Ntnozomi] folder in the [Locate] dialog box and click the [Open] button.
Select [oemsetup] and click the [Open] button.
Click the [OK] button in the [Install from Disk] dialog box.
Click the [Next] button of the [Add Printer wizard].
Enter [Printer Name] as necessary and click the [Next] button.
Designate whether or not to share the printer with other network computers. If shared, enter
an adequate shared printer name.
A prompt asks you saying [Print Test Page?] Select [Yes] to print a test page and [No] other-
wise, and then click the [Finish] button. Now the printer driver is copied and the printer added.
A test page will be printed out if so designated.
■
Printer Driver Setup from Client
When the printer connected for Microsoft TCP/IP Print Service is set up as a shared printer, a Windows
computer set up as a Microsoft network client can be connected to the printer.
To use a shared printer, each client should install the printer driver (Konica IP-011 Nozomi) and, for this
purpose, use [setup.exe] held in the [95 nozomi] or [Ntnozomi] folder. The setup program allows to install
not only the printer driver but the Konica IP-011 Nozomi Printer Tools and Readme.txt. Use the Printer
Tools from a computer connected in parallel with the printer. The Printer Tools cannot be used when
connection is made by TCP/IP.
For more detail of the printer driver, refer to the instruction manual of the Konica IP-011 Printer Controller.
Set the CD-ROM containing the printer driver in the CD-ROM drive.
Double-click [Setup.exe] in the [95nozomi] folder if the client’s OS is Windows 95/98, or in the
[Ntnozomi] folder if the OS is Windows NT, to start the installer.
When the startup screen of the installer has appeared, click the [Next] button.
The [Software License Agreement] screen appears. Click [Yes] if you agree.