Konica Minolta kn-304 Manuel D’Utilisation

Chapter 5  NetWare Setup

5-2  KN-304  Network Board

To print with the Konica 7020 series fitted with the KN-304 Network Board by using Novell NetWare, the

setup procedures depend on the NetWare version and the method of resource management.

■

 Setup for NetWare 2.x/3.x

Before setting up NetWare, you have to define the print server name, etc., from the 7020 series machine’s

LCD panel or MAP (Web utility).  See Chapter 6, Setup Utility MAP, for setting up NetWare by MAP.  See the

manual of Novell NetWare for setting up with PCONSOLE.

The setup procedure of NetWare 2.x/3.x is as follows.  To perform this procedure, you must be autorized as

supervisor.

Start up PCONSOLE and select the file server to use.

 Generate and assign a print queue.

Define KN-304 as the print server.

Define the notification list/password as necessary.

Set up the primary file server as necessary.

On completion of setup, turn off printer’s main power and turn it on again.  The printer will print out a network

setup list indicating the file servers fitted with KN-304 and the queues that the file servers will service.

The primary file sever must be defined if the network is of a large scale and connects many sites

having more than one file server.  PCONSOLE should be used to set up the primary file sever.