Konica Minolta kn-304 Manuel D’Utilisation

Chapter 6  Setup Utility MAP

KN-304 Network Board 6-3

■

MAP setup

The MAP setup program installs two programs, MAP Setup and MAP.  MAP Setup is the program used to

set up the environment for MAP to detect KN-304.  Execute MAP Setup first.

To start MAP Setup, select [Start] - [Programs] - [Map] - [MAP Setup].  Once MAP Setup starts, the following

window appears.

In MAP setup, the protocol used by the KN-304 detected on startup of MAP, and the IP maximum hop

count, should be designated.  To detect the KN-304 that uses IPX, check the “Search IPX printer” box.  To

detect the KN-304 that uses IP, check the “Search IP printer” box.

To use IP as the network protocol, the Max Hops for IP Search should be designated.  The default of Max

Hops for IP Search (0-15) is 2.  When the value is set at 0, search will be exercised only in the segment to

which the computer that has activated MAP belongs.  When the value is 2, the network will be searched

everywhere accessible via up to two routers.  Note that the greater the value of maximum hop count, the

more traffics generated.

.