Konica Minolta kn-304 Manuel D’Utilisation

Chapter 6  Setup Utility MAP

KN-304 Network Board 6-7

●

 NetWare setup

Select [Setup NetWare]  from [Protocols] of the [Network Administration menu]

Set the parameters as necessary.

Enable Network

Check this box to enable Novell NetWare (IPX/SPX) as the print server protocol.  Click and

cross out the check mark unless the primary protocol of the print server is Novell NetWare.

This box is not checked by default.

Print Server Name

Every Novell print server has its own name assigned.  The default name of the KN-304 print

server is “KON_(serial number)”.  The serial number is shown on the label placed on the KN-

304 Network Board.

If you want to change the current print server name whether it is default or not, enter the new

name of up to 63 (1-byte) characters in this field.  The same name must be registered for

PCONSOLE: otherwise the new name is invalid.

Print Server Password

The network administrator assigns a password to the Novell print server.  If the password has

been assigned through NetWare PCONSOLE or NWADMIN, the password must be set in the

print server.  Only upper-case letters are valid for the print server password if used in bindery

mode.