Konica Minolta kn-304 Manuel D’Utilisation

Appendices

KN-304 Network Board Appendices-5

 Assign an IP address to the KN-304.  You may use DHCP.

 Initiate access to the desired KN-304 by using the Web utility.

 Select “TCP/IP Setup” from the main menu.

The NetBIOS name for the KN-304 is shown on the screen.  The NetBIOS name is the KN-

304’s serial number (for example, KON_993011).

You can enter a new name to change the current NetBIOS name.  It should be a string of up to

15 1-byte characters.

If the DHCP server is set up so that the address of the primary WINS server be supplied to the

KN-304, the address is shown in the TCP/IP Setup menu.  If it is not shown, enter the IP

address of the primary WINS server.  You can also enter the IP address of the secondary

WINS server if you like.  If the DHCP server is set up so that the address of the secondary

WINS server be supplied to the KN-304, the address is automatically filled.

Restart the printer (KN-304).

The printer’s status page should now show that the KN-304’s name has been successfully

registered in the WINS server.

●

 FTP printing

FTP printing by Netscape

Connect to the KN-304’s port through which print jobs are sent.  For example, perform the follow-

ing steps to print through the KN-304 by Netscape.

Type [ftp://port1@<KN-304’s IP address].

Select [File] from the menu bar.

Select [Upload File].

More than one file cannot be selected for FTP printing.