Clarion TB851P Manuel D’Utilisation

 

280-8212-00

TB851P/TB853W

Note:
• For your safety, the TB851P/TB853W has a safety

function which turns off the picture when the car
is moving, so only the audio can be heard. The
picture can only be watched when the car is
stopped and the parking brake is applied.

1. Press the [SRC] button and select the TV

mode.

2. Press the [

A] or [D] button to tune in the

desired TV station.

Press the [

A] or [D] button to select the

channel.

The channel number appears at the top right of
the screen.

∗ Each time the [A] or [D] button is pressed, the

channel number increases or decreases by 1.

Press and hold the [

A] or [D] button for 1

second or longer.

The seek tuning mode is now selected. Tuning
will stop automatically at a channel where a
broadcast is received.

∗ If seek tuning stops before or after a broadcast

channel, then press the [

A] or [D] button

again.

A total of 12 TV stations can be stored. This
allows you to select your favorite TV stations
and store them in memory for later recall.

1. Press the [

w] or [z] button to select a

preset channel.

You can now view the channel you stored in
the memory.

Two types of lists can be displayed. One is the
preset list and the other is the channel list.

• The preset list is a list of channels already

stored in the memory.

• The channel list is a list of receivable

channels.

●Selecting a station from the preset list
1. Press the [P.LIST] button shown on the main

screen of the TV.

Preset list screen appears.

2. Select a channel by pressing the [

A], [D],

[

w], or the [z] button.

3. Press the [ENT] button for that channel.
●Selecting a station from the channel list
1. Press the [CH.LIST] button shown on the

main screen of the TV.

A list of receivable channels appears on the
channel list screen.

2. Select a station from the preset list using

steps 2 and 3 above.

Notes:
• Either 8 or 12 screens can be displayed.

∗ The factory setting is “12 Stations”.

• To change the number of broadcast stations

displayed on the list screen, see “Set the number
of multiscreens”. (See page 17.)

*TB851P/TB853W(09-20)E

05.2.25, 11:26 AM

11